GCC Technologies Jaguar J5-101, User Manual

Page: 108 / 196

Jaguar V User Manual
CorelDRAW Plug-In A-3
Add Registration Mark by Object
If you tick “Add Registration Mark by Object”, you will be offered three options of registration
marks as shown below.
4-Point Positioning

Length: The length of marks

Range: 5mm~50mm

Optimized Setting: 25mm

Thickness: The line thickness of marks

Range: 1mm~2mm

Optimized Setting: 1mm

Margin: The distance between marks and images

Range: 0mm~50mm

Optimized Setting: 5mm
Segmental Positioning

X Step: The distance of intermediate position on the X axis

Y Step: The distance of intermediate position on the Y axis

Range: 200mm~600mm

Optimized Setting: Less than 500mm
Multiple Copies

No. of X Copies: The numbers of copies on X axis

No. of Y Copies: The numbers of copies on Y axis

Range: 1~50. (The more copies you make, the more time
is needed for data transmission.)

Numbers of X Copies * Numbers of Y Copies = The total
amount of image copies

Copies with outline
：
To show outlines of image graphics
Figure A3-4
Note: The values entered in the “4-Point Positioning” section (length, thickness and
margin) will still be applied when you tick “Segmental Positioning” or “Multiple Copies”.