GCC Technologies Jaguar J5-101, User Manual

Page: 52 / 196

Jaguar V User Manual
Installation
2-41
2.9.2.2 Manually Activate Software
If the computer connected to cutter doesn’t have internet connection to accomplish above
software activation process, you can use “Activate manually” function alternatively to enter the
“Activation Code” to start the usage of Sure Cuts A Lot. Meanwhile, you need to find another
computer that has internet access to obtain the “Activation Code” in advance following below
instructions.
Step 1 Check the "Activate manually" checkbox and you should see the Site Code and
Activation Code fields appear. The Site Code field will be pre-filled in and cannot be
changed.
Step 2 Visit http://www.craftedge.com/activation/surecutsalot via an internet connected
computer. Enter your name, serial (software key, shows on the DVD cover) and site
code.
Step 3 Click on the "Generate Activation Code" button, and your activation code will be shown
in the Activation Code field.
Note

If you use a trial version to output graphics, meaning you do not enter the
software key to activate the Sure Cuts A Lot mentioned above, there will be
two extra lines cut through the design, therefore, make sure the Sure Cuts
A Lot software is activated before implementing cutting jobs.