AR-24 User Manual
Installation 2-7
Step 4
Insert the blade holder into tool carriage. Please note the outward ring of the holder must put
into the grooves of carriage firmly (see Figure 2-11), fasten the case (Figure 2-12).
Figure 2-11
Figure 2-12
Step 5
Use the reversing steps to remove the blade holder
Step 6
Eject the blade: Push “Blade eject pin” to eject blade when the blade
needs to be replaced.
Caution!!
The blade will lose its sharpness after a period of usage; hence the cutting
quality might be affected. By increasing the cutting force, it might do the
trick. However, once the blade is worn out and no longer provides a reliable
cutting, you should replace a new one. The blade is consumable and must
be replaced as often as necessary to maintain the cutting quality. The
quality of the blade deeply affects cutting quality. So be sure to use a high
quality blade to ensure good cutting results.
Tips - When to replace a new blade:
If the blade is broken, you have to replace a new one.
If cutting quality is not as good as usual, you may need to replace a
new one.
If the material cannot be cut through by higher cutting force, you may
need to replace a new one.