HiToP
®
Metabol
11
gbo Medizintechnik AG
Version 1.4
Figure 1: back view
3.2.1 Voltage change-over and fuses
The voltage chosen is indicated on the round voltage selector. The actual voltage is
marked by an arrow.
To change the fuses, unplug the mains cable. The device is protected by two fuses
on the mains side that are located in a pluggable box at the back of the device.
With a screw driver the box can be pulled out of the receiver by the small slot.
Warning!
The mains socket is sealed with a scotch tape. This is to remind to
check prior to switch-on, whether the voltage set corresponds to
the supply voltage in your country.
The scotch tape over the mains socket is easy to remove. Connect the device for
High Tone Therapy with the mains cable to a shockproof socket.
The device is switched on by the mains switch at the back of the device. This
inhibits erroneous, unintended disconnection of the device during normal
operation.
Main switch
Voltage selector
Main input
Fuses
