Quick Reference Guide
QRG-S1080-1000
Revision B
August 22, 2013
Company Proprietary
Page 21 of 22
NOTES:
1.
The FTP, SMTP server settings have to be configured first at the
Network and Port Screen
(see
Section
10.0, Network and Port Screen
).
2.
Limit the size of outgoing video clips via email. For more information, consult a qualified IT/MIS
administrator or your ISP.
3.
Access is based on the SD card’s speed. Use a high-speed SD card to increase the access efficiency.
4.
To enable
Alarm Audio Playbac
k, the user needs to enable
Audio with Speaker
mode (see
Section 8.0,
Audio
).
5.
For H.264 and MPEG4 files, the number of files attached for SMTP is one, even though it is set for
higher values. For the number of attachments, a number higher than one is valid only for JPEG
streams.
Click on the
Ok
button to save any changes and wait for the changes to take effect.
12.0
STORAGE
At the
Live Video Screen
(see Figure 15), click on
Storage
, and the
Storage Screen
opens. At this screen you create a
recording schedule and assign a location for the recording whenever an alarm is triggered.
Figure 27
Storage Screen
12.1
Create a Recording Schedule
Click on the
Add Schedule
button, located at the bottom left-hand side of the
Storage Screen
(see Figure
1.
27), and the
Schedule
Selection Screen
opens.
