![background image](http://html1.mh-extra.com/html/gbc/930-028/930-028_operating-and-maintenance-manual_4073839021.webp)
F-60+ Operation and Maintenance Manual
Operation
© GBC Pro-Tech 1999 April
3-3
5HDU &RQWURO
The switch on the back of the drive cabinet starts and
stops the main rolls when pressed while guards are in
place.
Figure 3-6: Rear RUN/STOP Switch
6HWXS
Setup of the F-60+ Laminator is quick and straightfor-
ward when instructions are followed exactly.
To adjust the nip, please see Maintenance.
/DPLQDWRU 0DLQ 5ROO 3UHVVXUH
Use only the minimum amount of roll pressure needed
to accomplish the task. While higher pressure can make
the adhesive bond faster, excess pressure can damage
the rolls. Wrinkles and bubbles have causes that gener-
ally cannot be cured by applying more pressure.
CAUTION
A typical roll pressure for soft substrates such as Foam-
core is between 30 to 40%.
The range of typical values for hard substrates is 30 to
50%.
/DPLQDWRU 3XOO 5ROO 3UHVVXUH
The F-60+ Laminator has an adjustable roll pressure
for adjusting traction in the material across the width of
the material using the pull roll height adjust crank. The
same crank permits an infinite choice of gaps for board
mount applications.
Figure 3-7: Pull Roll Clutch and Pull Roll
Height Adjust Crank
:HE 8S 2SWLRQV
With the guard removed, move webs through the main
roll nip by:
1. Pressing the RUN button for a slow, constant main
roll rotation.
or
2. Pressing the STOP button, then pressing the foot-
switch to set the required speed. Releasing the
footswitch stops main roll rotation.
Excess pressure can damage the laminating rolls.
Minimum laminator roll pressure is consistent
with good results.
Rear
RUN/STOP
Switch
Pull Roll
Height
Adjust
Crank
Pull Roll
Clutch
Summary of Contents for 930-028
Page 10: ...Safety F 60 Operation and Maintenance Manual 1 6 GBC Pro Tech 1999 April Blank page...
Page 36: ...Operation F 60 Operation and Maintenance Manual 3 18 GBC Pro Tech 1999 April Blank page...
Page 44: ...Warranty F 60 Operation and Maintenance Manual 5 2 GBC Pro Tech 1999 April Blank page...
Page 46: ...Specifications F 60 Operation and Maintenance Manual 6 2 GBC Pro Tech 1999 April Blank page...