GBC 620os
Operation Manual
© 2007 General Binding Corporation
Page 12
FEATURES/ACCESORIES GUIDE
Figure 12
Figure 13
Figure 14
PULL ROLLERS
(
Fig. 12– Item F1)
The
Pull Rollers
are silicone driven rollers that pull the
film and media through the machine and into the
Bursting
Rollers.
SKEW WHEEL
(
Fig. 12– Item G1)
For proper “snapping” of images, the out put must have a
“skew” in the paper or a raised “tent” on one side of the
output. By adjusting the
Skew Wheel
, you can adjust the
amount of “Skew” or “Tent” needed for proper “snapping”.
SKEW WHEEL PRESSURE ADJUSTMENT
(
Fig. 12– Item G2)
The
Skew Wheel Pressure Adjustment
can be made by
turning the screw down for more pressure and up for less.
SKEW WHEEL LOCK DOWNS
(
Fig. 12– Item G3)
The
Skew Wheel Lock Downs
secure the
Skew Wheel
to
the shaft. These are used to relocate the
Skew Wheel
as
needed.
IN LINE PERFORATOR WHEEL
(
Fig. 12– Item H1)
The
In Line Perforator Wheel
“perfs” the edge of the film
allowing the images to be “snapped” or “separated”.
PERFORATOR WHEEL TENSION ADJUSTMENT
(
Fig. 12– Item H2)
The
Perforator Wheel Tension Adjustment
can be made
by turning the screw.
PERFORATOR WHEEL LOCK DOWN
(
Fig. 12– Item H3)
The
Perforator Wheel Lock Down
secures the
Perforator
Wheel
to the shaft. This is used to relocate the
Perforator
Wheel
as needed.
OUTPUT FEED BELTS
(
Fig. 12– Item I1)
The
Output
Feed Belts
assist the finished images into the
Burst Rollers.
PAPER GUIDES
(
Fig. 13– Item J1)
The
Paper Guides
catch and orientate the finished images.
REAR SAFETY LATCHES
(
Fig. 13– Item K1)
The
Rear Safety Latches
lock the
Rear Safety Shield
into
place.
REAR SAFETY SHIELD
(
Fig. 13– Item L1)
The
Rear Safety Shield
protects the operator from harm.
REAR TABLE
(
Fig. 13– Item M1)
The
Rear Table
catches the finished product.
EDNord - Istedgade 37A - 9000 Aalborg - telefon 96333500
