Gazelle Makki Series, User Manual

Page: 123 / 438

Gazelle Makki Manual | 37
Using the Makki
3.6 Lighting
Switching on lights:
1. Press the button +
52
for a moderate period of time
2. Check that both the front and rear lights are on.
Switching off lights:
1. Press the button +
52
for a long period of time.
The lights will switch off.
3.7 On-board computer
3.7.1 Switching drive unit on/off
The drive unit may only be activated if the following conditions
have been met:
•
A sufficiently charged battery has been installed; see ’Using
the battery’, section 3.3 (page 30).
•
The speed sensor has been connected correctly;
see ’Adjusting speed sensor’, section 4.3.5 (page 56).
Switching on drive unit:
There are two possible ways for switching on the drive unit:
•
Press the on-board on/off button
51
.
The display of the on-board computer
4
lights up.
52
"
WARNING
" Ensure that the front light does not
obstruct the vision of other road users. The light
beam must not point directly forwards.
"
DANGER
" Before using the bicycle, please first
read ’Cycling’, section 3.10 (page 47).
51
PTC-0454 Gazelle - Makki EN.book Page 37