Gazelle Makki Series, User Manual

Page: 142 / 438

56
Makki
2. Inflate the tyre:
•
to 3.2 bar for optimal cycling comfort;
•
harder with higher loads.
3. Remove the pump.
4.3.5 Adjusting speed sensor
The speed sensor and the associated spoke magnet must be
mounted in such a way that, after a turn of the wheel, the spoke
magnet moves past the line of the speed sensor with a
clearance of at least 5 mm and no more than 17 mm.
Adjusting speed sensor
1. Unscrew the screw of the spoke magnet
33
.
2. Position the spoke magnet
33
in such a way that after a
turn of the wheel it moves past the line of the speed
sensor
34
with a clearance of at least 5 mm and no more
than 17 mm.
3. Fasten the spoke magnet
33
by tightening the screw.
"
WARNING
"
The maximum tyre pressure is stated on the
sidewall of the tyre (4 bar).
"
REMARK
" If after adjusting the speed you do not
see it displayed on the on-board computer,
contact a Gazelle service specialist.
34
33
PTC-0454 Gazelle - Makki EN.book Page 56