A
A
雲台校正
接下來墊高右(左)腳，一樣以遙控器副翼調整雲台到水平。
完成後按下SET鍵，此時四顆燈同時
閃爍後熄掉，完成設定。
你也可以只校正上下軸，水平軸則按兩次SET鍵略過。
你也可以只校正水平軸，方法是先按兩次SET鍵略過上下軸後再校正水平軸。
Camera Gimbal Calibration
14.Raise the other side of the pole (horizontal axis of camera gimbal)
, adjust the camera gimbal to level with AIL stick as previous step.
15.Press SET buttom to confirm, then
the SET, GPS, MODE, SENSOR
LED lights will all flash then turn off
to indicate the calibration of camera
gimbal is completed.
You can also only adjust the vertical axis of the camera gimbal, press SET buttom twice to ignore
the calibration procedures of horizontal axis servo.
Or you can ignore the calibration procedures of vertical axis servo by pressing SET buttom twice,
and adjust only the horizontal axis servo.
23
MODE 1
