系統校正
將機體停懸約1.5m高,以微調校正中立點。
完成校正後按下SET鍵。
此時SET燈號會閃三下完成
接下來將遙控器切換至自動平衡模式,
完成後按下SET鍵,等燈號閃爍確認後將微調回歸中立,
此時便完成自動平衡模式下的機體校正。(定位模式不需校正)
完成後將遙控器微調
手動模式下的校正。
回歸中立。
同時調整機體停懸時的微調。
System Tunning
8.Hover about 1.5m above the ground, calibrate the attitude of 500X with trimmers of the transmitter.
9.Press “SET” buttom when
calibration is completed.
10.“SET” LED light flashes three
times when calibration under
manual mode is completed.
11.Set all trims to neutral
after calibration.
12.Switch to “Auto-balance” mode, and
calibrate the attitude of 500X with
trimmers of the transmitter.
13.Press “SET” bottom when calibration is completed. Set
all trims to neutral after calibration. (GPS positioning mode
does not need to be calibrated.)
1.5m
10