系統組立
將防震泡棉貼於GU-INS本體的四個角落。
將它置中貼於500X的平台上。
*GU-INS附近要遠離磁鐵或導磁材料，以避免干擾內部的感測器。
將四個電子變速器的電源線如圖纏繞約四圈後再插入四合一接頭。(這是為了減低電流所產生的磁場干擾)
磁力計位置
System Assembly
1.Install the damper sponges to the corners under GU-INS.
2.Install the GU-INS to the center of the platform.
Front
Back
*Please keep GU-INS away from magnetic material interference.
3.Entwine the power cable about 4 circles as illustrated, and then insert it to the 4-in-1 power connector.
(This is to reduce magnetic interference generated by the current.)
Magnetometer
3
