Gateway NX100X - Core Solo 1.06 GHz Reference Manual Download Page 17

Page: 17 / 142

www.gateway.com

Ventilation
fan

Helps cool internal components.

Warning:

Do not work with the notebook resting on

your lap. If the air vents are blocked, the notebook
may become hot enough to harm your skin.

Caution:

Do not block or insert objects into these

slots. If these slots are blocked, your notebook may
overheat resulting in unexpected shutdown or
permanent damage to the notebook.

Caution:

Provide adequate space around your

notebook so air vents are not obstructed. Do not use
the notebook on a bed, sofa, rug, or other similar
surface.

Customer
Care label

Includes the Customer Care contact information. For
more information, see

“Gateway contact information”

on page 3

Component

Icon

Description

Summary of Contents for NX100X - Core Solo 1.06 GHz















































































































































Search results

Summary of Contents for NX100X - Core Solo 1.06 GHz

Reviews:

Related manuals for NX100X - Core Solo 1.06 GHz

Brands by name

Popular brands

Gateway NX100X - Core Solo 1.06 GHz, Reference Manual

Search results

Summary of Contents for NX100X - Core Solo 1.06 GHz

Reviews:

Related manuals for NX100X - Core Solo 1.06 GHz

Brands by name

Popular brands