Gateway NV55 Service Manual Download Page 63

Page: 63 / 164

www.gateway.com

If your new optical drive already has it’s own bracket and bezel, go to

step 10

If you need to use the bracket and bezel from the old optical drive, perform

steps

–

as necessary.

Detach the bezel from the old optical drive.

Remove the screws that secure the optical drive bracket, and then detach

the bracket from the drive.

Attach the bezel to the new optical drive.

Attach the bracket to the new optical drive and secure it with the screw

removed in

step 7

Slide the new optical drive into the drive bay and make sure it’s properly

engaged to the ODD1 connector.

Secure the new drive to the system board with the screw removed in

step 3

Reinstall the bay cover.

Summary of Contents for NV55





































































































































































Search results

Summary of Contents for NV55

Reviews:

Related manuals for NV55

Brands by name

Popular brands

Gateway NV55, Service Manual

Search results

Summary of Contents for NV55

Reviews:

Related manuals for NV55

Brands by name

Popular brands