Gateway NV55 Service Manual Download Page 21

Page: 21 / 164

www.gateway.com

Power supply

Power savings

Item

Specification

Vendor

Delta

Liteon

Hipro

Input rating

90V AC to 264V AC, 47Hz to 63Hz

Maximum input AC current

1.7A (max)

Output rating

19V DC, 3.42A, 65W

ACPI mode

Power Management

Mech. Off (G3)

All devices in the notebook are turned off completely.

Soft Off (G2/S5)

OS initiated shutdown. All devices in the notebook are turned off completely.

Working (G0/S0)

Individual devices such as the CPU and hard disc may be power managed in this state.

Suspend to RAM (S3)

CPU set power down

VGA suspend

PCMCIA suspend

Audio power down

Hard drive power down

Optical drive power down

Super I/O low power mode

Save to Disk (S4)

Also called Hibernation mode. System saves all system states and data onto the disc prior

to powering off the whole system.

Summary of Contents for NV55





































































































































































Search results

Summary of Contents for NV55

Reviews:

Related manuals for NV55

Brands by name

Popular brands

Gateway NV55, Service Manual

Search results

Summary of Contents for NV55

Reviews:

Related manuals for NV55

Brands by name

Popular brands