Gateway MG1, Service Manual, Page: 72 / 192

CHAPTER 3: Replacing notebook components
66
Replacing the CMOS battery
Tools you need to complete this task:
v
Screws removed during this task:
To replace the CMOS battery:
1
Complete the steps in “Preparing the notebook” on page 55 .
2
Remove the optional IEEE 802.11 wireless card by following the instructions in
“Replacing the IEEE 802.11 wireless card” on page 63 .
Important
Use only CMOS batteries designed for this Gateway notebook.
Flat-blade driver Scribe or non-marring tool - OR -
Phillips #0 screwdriver
2 black M2×3 (IEEE
802.11 wireless card)
CMOS
battery
bay