manualshive.com logo in svg

Gateway EC14T Series, Service Manual

Share
Download
Gateway EC14T Series Service Manual Download Page 168

158

Chapter 4

c.

Select the microphone type from the list and click 

Next

.

d.

Follow the onscreen prompts to complete the test.

8.

If the Issue is still not resolved, see “Online Support Information” on page 165.

HDD Not Operating Correctly

If the 

HDD

 does not operate correctly, perform the following actions one at a time to correct the problem. 

1.

Disconnect all external devices.

2.

Run a complete virus scan using up-to-date software to ensure the computer is virus free. 

3.

Run the Windows Vista Startup Repair Utility:

a.

insert the Windows Vista Operating System DVD in the ODD and restart the computer. 

b.

When prompted, press any key to start to the operating system DVD. 

c.

The 

Install

 

Windows

 screen displays. Click 

Next

. 

d.

Select 

Repair your computer

. 

e.

The 

System

 

Recovery

 

Options

 screen displays. Click 

Next

. 

f.

Select the appropriate operating system, and click 

Next

. 

NOTE: 

Click 

Load

 

Drivers

 if controller drives are required. 

g.

Select 

Startup

 

Repair

. 

h.

Startup Repair attempts to locate and resolve issues with the computer.

i.

When complete, click 

Finish

. 

If an issue is discovered, follow the onscreen information to resolve the problem.

4.

Run the Windows Memory Diagnostic Tool. For more information see Windows Help and Support.

5.

Restart the computer and press F2 to enter the BIOS Utility. Check the BIOS settings are correct and that 
CD/DVD drive is set as the first boot device on the Boot menu.

6.

Ensure all cables and jumpers on the HDD and ODD are set correctly.

7.

Remove any recently added hardware and associated software.

8.

Run the Windows Disk Defragmenter. For more information see Windows Help and Support.

9.

Run Windows Check Disk by entering 

chkdsk

 

/r

 from a command prompt. For more information see 

Windows Help and Support.

10.

Restore system and file settings from a known good date using 

System

 

Restore

. 

If the issue is not fixed, repeat the preceding steps and select an earlier time and date.

11.

Replace the HDD. See “Disassembly Process” on page 34.

Summary of Contents for EC14T Series





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands