manualshive.com logo in svg

Gateway EC14T Series, Service Manual

Share
Download
Gateway EC14T Series Service Manual Download Page 12

2

Chapter 1

•

WLAN:

•

Intel® WiFi Link 5100 802.11a/b/g/Draft-N*

•

Intel® WiFi Link 5100 802.11a/b/g*

•

Intel® WiFi Link 1000*

•

WPAN: Bluetooth® 2.1+Enhanced Data Rate*

•

LAN: Gigabit Ethernet; Wake-on-LAN ready

Privacy control

•

BIOS user, supervisor, HDD passwords

•

Kensington lock slot

Dimensions and Weight

•

285 (W) 208.9 (D) 28.5/34.5 (H) mm (11.22 x 8.22 x 1.12/1.36 inches)

•

1.72 kg (3.79 lbs.) (non-3G SKU)

Power subsystem

•

ACPI  3.0

•

62.16 W 5600 mAh

•

3-pin 30 W AC adapter

•

ENERGY STAR®*

Special keys and controls

•

84-/85-/88-key keyboard

•

Multi-gesture touchpad pointing device

I/O interface

•

Multi-in-1 card reader (SD/MMC/MS/MS PRO/xD)

•

USB 2.0 port

•

HDMI™ port with HDCP support

•

External display (VGA) port

•

Headphones/speaker/line-out jack with S/PDIF support

•

Microphone-in jack

•

Ethernet (RJ-45) port

•

DC-in jack for AC adapter

Environment

•

Temperature:

•

Operating: 5 °C to 35 °C

•

Non-operating: -20 °C to 65 °C

•

Humidity (non-condensing):

•

Operating: 20% to 80%

•

Non-operating: 20% to 80%

NOTE: 

The specifications listed above are for reference only. The exact configuration of the PC 

depends on the model purchased.

Summary of Contents for EC14T Series





















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands