manualshive.com logo in svg

Gateway E SERIES E-6000, User Manual, Page: 139 / 190

Share
Download
Gateway E SERIES E-6000 User Manual Download Page 139

133

Troubleshooting

support.gateway.com

■

DVDs and DVD drives contain 

regional codes

 that help control DVD title 

exports and help reduce illegal disc distribution. To be able to play a DVD, 
the disc’s regional code and your DVD drive’s regional code must match.

The regional code on your DVD drive is determined by your computer’s 
delivery address. The regional code for the United States and Canada is 1. 
The regional code for Mexico is 2. Your DVD drive’s regional code must 
match the regional code for the disc. The regional code for the disc is on 
the disc, disc documentation, or disc packaging.

If the DVD movie does not play, the disc’s regional code and your DVD 
drive’s regional code may not match.

Cleaning CDs and DVDs

Clean discs by wiping from the center to the edge, not around in a circle, using 
a product, such as a soft cloth, made especially for cleaning CDs and DVDs.

Computer

The computer will not start

■

Make sure that the power cord is connected to an AC power source and 
your computer is turned on.

■

Open the computer case and make sure that the power supply cable is 
connected correctly to the system board.

■

Open the computer case and make sure that the power button cable is 
connected correctly to the system board.

Summary of Contents for E SERIES E-6000































































































































































































Reviews:

No comments