Gateway Computer, User Manual

Page: 91 / 136

85 www.gateway.com
Creating an Ethernet network
Determining if wired Ethernet is already installed on your computers
To determine if wired Ethernet is already installed on your computer:
1
Click
Start
, then click
Control Panel
. The Control Panel window opens. If your Control
Panel is in Category View, click
Performance and Maintenance
.
2
Click/Double-click
System
, click the
Hardware
tab, then click
Device Manager
. The Device
Manager window opens.
3
Click the plus (+) in front of
Network adapters
. The wired Ethernet device installed in
your computer is listed. If one is not listed, you must install one.
Creating an Ethernet network
Installing Ethernet cards and drivers
After you have determined the type of Ethernet you are using for your network, you need
to install Ethernet cards and drivers on the computers that do not have Ethernet already
installed. To order wired or wireless Ethernet PCI or PC cards, visit the Accessories Store
at
accessories.gateway.com .
Use the documentation that comes with your Ethernet cards for instructions on installing
the card and any required drivers.
Tips & Tricks
When buying your router, be sure the model includes everything your
network needs, including:
■
Internet security features - such as a firewall to protect your network
from unwanted intruders
■
4-port switch - to eliminate the need for additional network hardware
■
DHCP server/dynamic IP address assignment - to automatically
configure network and IP addresses