Components 21
Installing the Device
1. Remove the plastic filler panel as described in the procedure on page 19.
2. If installing a 3.5-inch device in a 5.25-inch bay, attach the adapter brackets
to the device with their corresponding screws.
3. Through the front, gently insert the device into the bay and position the
device so that the mount holes on both the device and mounting brackets are
aligned.
4. With the mounting screws supplied with the device, secure the device to the
mounting brackets.
Figure 18: Installing Adapter Brackets on a 3.5-inch Device
Figure 19: Installing a Device into a 3.5-inch External Bay
Note:
Adapter brackets come
standard with ALR’s 3.5-inch
drives.
Maints.boo Page 21 Friday, July 10, 1998 1:47 PM
