34
Gateway ALR 7200R User’s Guide Supplement
The disk drive LED illuminates continuously.
An adapter card is not recognized by the system.
Probable Cause
Solution
The disk is corrupted.
Remove the disk from the drive. If the light remains
on, try restarting the system.
The cable to the drive is
not connected properly.
Open the system and check the cable between the
disk drive and its controller. Make certain the pins
are not bent or misaligned.
Probable Cause
Solution
The interrupt and/or I/O
address is set incorrectly.
Check the address configuration of the adapter
card and ensure that it does not conflict with
another card in the system.
The card has not been
configured through the
software (e.g., EISA
configuration utility).
Configure the card with the appropriate software.
The card was not installed
correctly.
Reseat the card and make certain that its jumpers
are configured appropriately.
3437.boo Page 34 Wednesday, October 7, 1998 4:01 PM
