Gateway 9515, User Manual

Page: 147 / 194

142
www.gateway.com
Memory
Memory errors were detected during server start up
■ Open your server and make sure that the memory modules are installed correctly. For
instructions, see
“Installing memory” on page 76 .
■ A memory module may be defective. If possible, try another memory module and
see if the error repeats.
Modem (telephone dial-up)
See also Internet .
Your modem does not dial or does not connect
■ Make sure that your server is connected to the telephone line and the telephone line
has a dial tone.
■ Make sure that the modem cable is less than 6 feet (1.8 meters) long.
■ Remove any line splitters or surge protectors from your telephone line, then check
for a dial tone by plugging a telephone into the telephone jack.
■ If you have additional telephone services such as call waiting, call messaging, or voice
mail, make sure that all messages are cleared and call waiting is disabled before using
the modem. Contact your telephone service to get the correct code to temporarily
disable the service. Also make sure that the modem dialing properties are set correctly.
■ If you purchased the modem from Gateway, contact Gateway Customer Care.
To check the dialing properties in Windows:
1
In Windows 2000 Server, click
Start
,
Settings
, then click
Control Panel
. The Control Panel
window opens.
- OR -
In Windows Server 2003, click
Start
, then click
Control Panel
. The Control Panel window
opens.
2
Click/Double-click the
Modems
icon, then click
Dialing Properties
. The Dialing Properties
dialog box opens.
3
Make sure that all settings are correct.
■ Make sure that you are not using a digital, rollover, or PBX line. These lines do not
work with your modem.