background image

Intraplex

®

 IP Link 100e 

Quick Start Guide v1.0 

Page 

2

 of 

8

 

 

Publication Information 

©2021 GatesAir, Inc. . Proprietary and Confidential. 

GatesAir considers this document and its contents to be proprietary and confidential.  
Except for making a reasonable number of copies for your own internal use, you may 
not reproduce this publication, or any part thereof, in any form, by any method, for any 
purpose, or in any language other than English without the written consent of GatesAir. 
All others uses are illegal. 

This publication is designed to assist in the use of the product as it exists on the date of 
publication of this manual, and may not reflect the product at the current time or an 
unknown time in the future. This publication does not in any way warrant description 
accuracy or guarantee the use for the product to which it refers.  

GatesAir reserves the right, without notice to make such changes in equipment, design, 
specifications, components, or documentation as progress may warrant to improve the 
performance of the product. 

Trademarks 

 

[Product names and other appropriate trademarks, e.g. Maxiva™, Intraplex® HD 
Link™, PowerSmart®, Flexiva™ 3DX®] are trademarks of GatesAir or its subsidiaries. 
Microsoft® and Windows® are registered trademarks of Microsoft Corporation. All other 
trademarks and trade names are the property of their respective companies. 

Contact Information 

GatesAir has office locations around the world. For locations and contact information 
see:  http://www.gatesair.com/contact-us/ 

Support Contact Information 

For support contact information see:  

 

 

 

 

 

Summary of Contents for Intraplex IP Link 100e









Reviews: