Intraplex
®
IP Link 100e
Quick Start Guide v1.0
Page
7
of
8
the input and output channel settings.
You can change the sample rate and
channel sources.
Figure 17. Channel Settings Page
I)
Set Up RTP Unicast Streams
To create an RTP stream and set
stream parameters, complete the
following steps:
1. Click the
in the top right of the
input or output section of the
channel to bring up the
Add Stream
page (
Figure 18
).
Figure 18. Stream Creation
Window
2. For transmit streams, enter the
Destination IP
address. For receive
streams, no fields require any
changes.
3. Click
Save
and the stream will be
displayed on the channel on the
IPLink Home
page (
Figure 19
).
Figure 19. Channel with Stream
4. To begin streaming, right-click the
stream and click
Connect
. The
stream will turn green if connected
to a receiving stream and working
properly.
5.
To view or change the stream’s
settings, click on the stream and the
Streaming
window appears (
Figure
20
).
Figure 20. Stream Settings
Repeat the above steps to setup
additional RTP streams.
