Y35 HD v3
User Manual & Install Guide
124 of 156
▪
10 minutes
Temp. Increase Difference
DEFAULT SETTINGS:
▪
20
° Celsius
Debounce Time
–
multiple alarms of the same
resource active within the debounce time frame
are regarded as one alarm.
DEFAULT SETTINGS:
▪
10 seconds
Linkage
Click the
(Setup)
button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm. The Linkage setup
screen enables you to configure the following
options:
▪
Channel
–
checkboxes which allow you
to select any combination of the
camera channels to be included in the
display and recording. § Post
Recording
–
drop list which allows you
to select the duration for which video
will continue to be recorded when the
alarm is triggered.
▪
Lock
–
checkbox, if selected will mark
the recorded video associated with this
alarm as locked video.
▪
Linkage IO Output
–
checkboxes, if
enabled, the device will send a signal
to the selected IO output lines.
▪
Output Delay Time
–
numeric text
field to set the delay time for the IO
output (in seconds).
▪
Linkage Screen
–
drop list to select the
options to display the video from the
selected cameras on-screen when the
alarm occurs.
None
: Not displayed.
Single
: Display 1 camera.
Double
: Display 2 cameras.
Quad
: Display 4 cameras.