Y35 HD v3
User Manual & Install Guide
121 of 156
G Sensor
Enable
Checkbox
–
if selected, enables the device to
monitor for G Sensor trigger events. In case of
G Sensor exceeding the threshold values, this
alarm will be triggered.
DEFAULT SETTINGS:
▪
Checkbox
–
Unselected
Alarm Type
Drop list to select the classification level for the
alarm:
▪
Event
▪
Alarm
DEFAULT SETTINGS:
▪
Alarm
Trigger
Click the
(Setup)
button under Trigger to
display the Trigger setup screen to setup the G
Sensor threshold values:
X
–
numeric text field to set the threshold value
for the G forces along the x-axis.
DEFAULT SETTINGS:
▪
2
Y
–
numeric text field to set the threshold value
for the G forces along the y-axis
.
DEFAULT SETTINGS:
▪
2
Z
–
numeric text field to set the threshold value
for the G forces along the z-axis.
DEFAULT SETTINGS:
▪
2
Debounce time -
Multiple alarms of the same
resource active within the debounce time frame
are regarded as one alarm
DEFAULT SETTINGS:
▪
10 seconds
Linkage
Click the
(Setup)
button under Linkage to go
to the Linkage setup screen. This sets up the
video display, recording and snapshot options
associated with this alarm.
