HOW TO INSTALL THE HEATER
For convenience and efficiency, install the heater:
• Where there is easy access for operation,inspection, and service.
• In the coldest part of the room.
WARNING: Never install the heater in these places:
• In a bathroom.
• In a bedroom
• In a recreational vehicle .
• Where curtains, furniture, clothing, or other flammable objects are less than 200CM
from the front, 150CM from the top, or 75CM from the sides of the heater.
• As a fireplace insert
• In high-traffic areas
• In windy or drafty areas
•
Do not place the heater facing to the cylinder, always place the cylinder at the back
side of the heater, and keep at least 50mm from the heater.
WARNING: Heater must be mounted to maintain
the minimum clearances shown in
Fig 05.
If possible, provide greater clearances from the
floor, ceiling, and joining walls.
FASTENING HEATER TO WALL
1. Mark the heater locations on the wall where heater will be located. Make sure heater is
level.
WARNING:
Maintain minimum clearances shown in
Fig 05.
If you can, provide
greater clearances from the floor and joining wall.
2. Mark screw locations on wall (see
Fig 07
).
3. Drill holes at marked locations
4. Insert wall plug into hole. Tap wall plug flush to wall.
5. Drive the screws into the wall plug, and keep screws at 7mm out from the wall.
6. Make sure the screws are firmly fastened to wall.
7, Hang the heater brackets onto the screws. And make sure that the heater is firmly
installation.
4