![background image](http://html1.mh-extra.com/html/gaswinkel/kf-001b/kf-001b_user-manual_3713810008.webp)
7)
Following the steps described under “connecting the cylinder”, connect a
new cylinder
OPERATION GUIDE
LIGHTNG INSTUCTION, see
Fig 08
A.
The heater has three settings. Lighting/Min(Pos.1), Minimum (Pos.2); Medium
(Pos.3) and Maximum (Pos.4)
B. Place the gas filled cylinder into the back of the heater.
C. Clip on the gas regulator to the gas cylinder.
D. Turn on the gas regulator.
1.
LIGHTING (please see the picture Fig 09)
Press the control button for 10 seconds at the Position 1, at the same time press the
Piezo igniter key to lit with thumb finger of right hand, Continue this procedure until
pilot ignites, approximately after 20 seconds leave Gas control Knob. At this stage if
the pilot is alight, If the pilot flame goes out please repeat this procedure. and then
turn the knob from Pos.1. to medium or Maximum power setting,
Pos. 1
(lighting/min)
Pos. 2
(Min)
Pos. 3
(Mid)
Pos. 4
(Max)
Fig 08
7