background image

WARNING

1.

Read the instructions before using this appliance.

2.

Never attempt to light if the hose is loose or damaged in any way.

3.

Do not cover the heater.

4.

Never disconnect the regulator while cylinder valve or regulator is open.

5.

Do not change cylinders in areas in which open fire exists.

6.

Do not expose your cylinder to extreme heat.

7.

Do not store any other cylinders in the room in which your heater is used.

8.

Keep young children and animals away from the heater. Do not insert your finger or

any other material through the front panel of the heater.

9.

Do not let unauthorized persons to tamper with your heater

10. Do not place appliance under electrical socket outlets.

11. This heater must not be used without a gas cylinder fitted for stability purposes.

12. Do not cover your heater. Fabrics, clothing, hangings, net curtains, bed linens and

other flammable materials may ignite if placed against the outlets of your heater.

13. In the event of leakage, the appliance should be turned off at cylinder valve and the

regulator disconnected from the cylinder. Call your gas supplier immediately.

14. After use turn off the appliance at the gas container valve.

15. This appliance requires a hose and a regulator, check with your gas supplier

16. Only use in well ventilated areas.

17. Do not use in vehicles, caravans or auto caravans.

18. Do not attempt to use in high-rise flats, basements, bathrooms or bedrooms.

19. This appliance should be tested for leaks before initial use and whenever the

cylinder is re-connected.

20. It is important that all gas connections have been correctly made to prevent any

leakage. Do not use naked flame to test for leaks. Use soapy water.

21. Always use your cylinder always in an upright position.

22. Always close the cylinder valve when the heater is not in use.

23. When lighting your heater for the first time or after a period of time has passed

since the last use, light the heater outside and burn outdoors for 15 minutes.

24. Do not use your heater while sleeping.

25. The guard on the appliance is to prevent risk of fire or injury form burns and no part

of it should be permanently removed. It does not give full protection for young

children or the infirm. We would recommend a fireguard to be fitted.

26. Do not move the heater and cylinder when in use.

1

Summary of Contents for KF-001B













Reviews: