22
23
Strength
The powerful refrigeration system is designed to withstand
heavy day-to-day loads. During peak loading, when other
refrigerators would give up, the correct temperature is kept
stable throughout the cabinet.
Easy cleaning
The inside walls of the cabinet are made of moulded plastic,
making them easy to clean.
Removable gaskets
The door gasket keeps in the cold. For cleaning, it is easy to
remove without the use of tools - simple and hygienic.
Robust, stable wire shelves
In our refrigerators, the heavy-duty, movable wire shelves are
mounted in U-shaped rails moulded into the plastic walls. The
rails prevent the shelves from tilting when pulled out.
TR/TN:
By placing the cabinet in an environment with high air humidity, it
may be necessary to install additional equipment for the evaporation of the
drip water in the pan near the compressor.
The appliance can be installed independently against a wall.
Location and installation:
The cabinet should be located in a dry, well-ventilated room. In order to operate
efficiently, it should not be placed in direct sunlight or near hot appliances. Optimal
performance is achieved at an ambient temperature of b16°C and +35°C.
Important:
The cabinet must have sufficient ventilation and free air circulation beneath, above
and behind the cabinet.
The legs under the cabinet and the spacers at the rear of the cabinet will help ensure
sufficient air space.
The cabinet is intended for connection to an alternating current. The connection
voltage (V) and frequency (Hz) are shown on the nameplate in the cabinet. The power
connection is made using a three-pin plug to a wall socket.
Any requirement for earthing from the local power supply must be met. The cabinet
plug and wall socket should then give a correct earthing.
If you are in doubt, contact your local supplier or authorized electrician
The colours of the wires in the mains lead of this appliance might not correspond
with the coloured markings identifying the terminals in your plug.
Proceed as follows:
- The wire which is coloured green and yellow must be connected to the terminal in
the plug which is marked “E”, with the earth symbol or coloured green and yellow. -
The wire, which is coloured blue, must be connected to the terminal, which is marked
with the letter “N” or coloured black
- The wire which is coloured brown must be connected to the terminal which is
marked with the letter “L” or coloured red.
Warnings: The appliance must be earthed.
The flexible cable fitted to this unit has three conductors for use with a 3-pin 13 Amp
plug. If a B.B 1363 (13 Amp) fused plug is used, it must be fitted with a 13 Amp fuse
or a right angle Schuko plug.
Important
The wires of this power cable are coloured according to the following code :
- Grey and yellow : earth
- Blue : neutral
- Brown : phase
Power requirements:
