3.
Press the ›Menu‹-button or the › + ‹ and › – ‹-buttons to select
the program ›Jelly‹. Once ›Jelly‹ flashes on the LED-display the
program is selected. The LED-display shows the default values for
the temperature and cooking time.
4.
Use the ›Timer / t °C‹-button to reach the time selection
mode. The minute indicator flashes. Use the › + ‹ and › – ‹-buttons to adjust the time. With the
›Hour / Min‹-button you can switch between hours and minutes. The LED-display shows the
pre-set cooking time 6 hours. You can adjust the cooking time from 1 hour to 8 hours.
5.
If necessary, adjust the Auto-Start-Function to start cooking later.
6.
Press and hold for a few seconds, the ›Start / Keep Warm on / off‹-button to start the appli-
ance. The ›Start / Keep Warm on / off‹-button lights up and the countdown of the cooking time
is shown in the time indicator.
7.
The Keep-Warm-Function turns on automatically immediately after the program is over. If
necessary, this function can be switched off by pressing and holding the ›Start / Keep Warm
on / off‹-button at any time.
8.
After completion of the program an acoustic signal will sound. Depending on the settings of
the appliance, the Keep-Warm-Function will launch (the LED display counts up the time) or the
appliance will return to standby mode.
9.
To cancel the selected program, to interrupt the cooking process or the Keep-Warm-Function
press and hold the ›Cancel / Keep Warm‹-button for a few seconds.
program steam
Recommended for steaming vegetables, fish, meat, dumplings, etc. The setting range of the
time is 5 minutes to 2 hours in 5-minute steps. The countdown of the program will start after
reaching the operating temperature (boiling water and steam development).
1.
Pour about 600-1000 ml of water into the inner pot. Place the steam insert inside the inner pot.
2.
Prepare the ingredients according to the recipe. Place these evenly in the steam insert and
install the inner pot into the housing. Make sure that the inner pot is firmly in contact with the
heating element.
3.
Close the lid until it clicks into place. Connect the appliance to the power outlet.
4.
Press the ›Menu‹-button or the › + ‹ and › – ‹-buttons to select
the program ›Steam‹. Once ›Steam‹ flashes on the LED-display
the program is selected. The LED-display shows the default
values for the temperature and cooking time.
5.
Use the ›Timer / t °C‹-button to reach the time selection
mode. The minute indicator flashes. Use the › + ‹ and › – ‹-buttons to adjust the time. With the
›Hour / Min‹-button you can switch between hours and minutes. The LED-display shows the
pre-set cooking time 6 hours. You can adjust the cooking time from 5 minutes to 2 hours.
6.
If necessary, adjust the Auto-Start-Function to start cooking later.
7.
Press and hold for a few seconds the ›Start / Keep Warm on / off‹-button to start the appli-
ance. The ›Start / Keep Warm on / off‹-button lights up. The countdown of the cooking time will
start after reaching the operating temperature (boiling water and steam development).
69
