39
Note:
Even with the heating elements switched OFF automatically, after completion of the
boiling cycle, the display will continue to show the current water temperature within
the kettle for up to 30 minutes.
PURIFY FUNCTION—GETTING REAL PURE WATER
Using the purify function, the kettle will boil the water for 3 minutes for purification. Sim-
ply press the purify button to start this function. The purify button and the interior of the
kettle are illuminated and the kettle will immediately start heating. The current water tem-
perature will be shown on the display and via the colour of the illumination of the kettle
(see: ‘Boiling Function’).
The kettle will boil the water for 3 minutes. Thereafter several beeps will sound. The hea-
ting elements are switched OFF and the illumination of the kettle and purify button will go
out. However, the display will still show the current water temperature up to 30 minutes.
KEEP-WARM FUNCTION—HEATING WATER TO THE DESIRED TEMPERA-
TURE
The electronic Water Kettle Colour Vision Pro can heat water to a selected temperature
in the range from 50°C to 85°C. The selectable temperature values are printed above
the display on the panel. This function is combined with the keep-warm function, which
will keep the water temperature for up to 30 minutes.
To use this function, press the temperature selection button several times. The display is
showing the various temperature values flashing one after the other. Additionally, the
red dot on the top line of the display is placed under the currently selected temperature
value, and the interior of the kettle is illuminated in the colour, assigned to the selected
temperature: cyan (50°C), blue (60°C), violet (70°C), red (85°C).
After approx. 5 seconds, the display stops flashing and the actual temperature in the
kettle will be shown. The kettle starts heating. When the water reaches the selected tem-
perature, a beep sounds, and the keep-warm function is started automatically. The water
is kept at the selected temperature for up to 30 min. Thereafter, the heating elements are
switched OFF automatically and the illumination of the kettle and temperature selection
button goes out.
