![Gastroback Colour Vision Pro Operating Instructions Manual Download Page 37](http://html1.mh-extra.com/html/gastroback/colour-vision-pro/colour-vision-pro_operating-instructions-manual_3740425037.webp)
37
leave the base unattended while connected to the power supply.
Check the entire appliance for proper operation before connecting it to the power sup-
ply. Ensure that there are no leaks in the kettle (see: ‘Checking the Kettle for Leakage’).
If water runs out during operation, immediately unplug the appliance (see: ‚Solving Pro-
blems‘). Otherwise, the appliance will not work properly and/or could get damaged.
Regularly clean the water filter (see: ‘Care and Cleaning’). Do not use violence.
Place the appliance on a level, flat, stable, and dry surface. Do not place the appliance
near the edge of the working space or on inclined surfaces or in a tray or tub to avoid
overflow and splashing of hot water and electric shock.
To avoid overheating, before operation, always fill a sufficient amount of clear drinking
water into the kettle (at least 0.5 litre / MIN).
Always remove the kettle from the base
and wait until the kettle cooled down, before filling the kettle. Do not operate the appli-
ance with the kettle empty.
However, Do not fill in more than the maximum amount (1.5
litre / MAX). If the kettle is overfilled, boiling water may splash out. Always ensure to
hold the kettle level, when it is filled.
Do not use any hard or edged objects (e.g. knives, metal scrapers) with the appliance
to avoid damage to the surfaces and seals. Do not leave water in the kettle after use, to
avoid excessive build-up of scale.
PREPARE THE KETTLE FOR OPERATION
1. Place the base on the designated working place near an appropriate wall power
outlet.
2. Remove the kettle from the base and open the lid. To open the lid, pull the opening
lever on top of the lid.
TIP:
You may fill the kettle through the spout, even with the lid still closed. This ensures a
better maintenance of the water filter. However, you may feel it more convenient to fill
the kettle by opening the lid.
3. Fill the desired amount of clear drinking water into the kettle.
Ensure that the filling
level is between MIN (0.5 litres) and MAX (1.5 litres).
Always keep the kettle level,
as soon as it is filled.
on
of
f
on
of
f
IMPORTANT:
When filling the kettle, ensure not to spill water on the exterior of the kettle.
If required, wipe dry the exterior of the kettle, before placing the kettle onto the base.