26
27
appliance automatically switches to the keep warm function (“Warm”).
Tip:
To keep your work space dry, you should keep the provided stainless steel bowl
or another sufficient coaster at hand, to place the glass insert on it after cooking.
Note
The temperature of the keep warm function is limited to 80°C.
WARNING:
The glass insert and glass lid will be hot and hot steam and con-
densate may escape from the kettle and the glass insert. Protect your hands with
rubber gloves or oven mitts to avoid burns.
9. Grasp the lid ring at both handles and lift the lid ring including the glass insert
out of the kettle. Carefully place the glass insert on the stainless steel bowl or a
suitable coaster and lay down the lid ring. Now you can grasp the glass insert
easily for taking out your food.
10. If your food is done, hold the “Start/Stop” button pressed for 3 seconds to switch
off the appliance. Otherwise, the appliance will keep the set temperature (80°C
at the maximum) for another 60 minutes.
11. If your food needs some more cooking time, you may simply replace the glass
insert in the kettle and leave the appliance running the keep warm function until
your food is done. Alternatively, you may cancel the program by holding the
“Start/Stop” button pressed for 3 seconds and thereafter start the “Boil” program
again with the appropriate time setting.
12. After the keep warm time elapsed, the appliance will switch back to standby
mode automatically. 5 minutes later on, the appliance will shut off completely
and the display will get dark.
13. After usage, you should discard the water within the kettle to avoid excessive
build-up of scale on the heating plate. Unplug the appliance.
CREATING YOUR OWN COOKING PROGRAM
You can adapt the “Custom” program to your own requirements. Select a tempera-
ture in the range of 40°C to 100°C (boiling) and cooking time of 30 seconds to 12
hours, just according to your recipe. To avoid excessive loss of water within the kettle
during operation, the water temperature within the kettle is limited to 90 - 95°C duri-
ng the cooking time (“Steeping”). However, with a temperature setting of 100°C,
the kettle will bring the water to the boil first.
The values you had set when starting the “Custom” program will be kept in memory
even after switching off and unplugging the appliance.
Note
After the set cooking time (“Steeping”) elapsed, the appliance will switch to the keep
warm function (“Warm”), keeping your meal warm for additional 60 minutes. However,
the temperature for the keep warm function is limited to 80°C at the maximum.
Important:
Please keep in mind, that the recent settings will be overwritten by any
new values you have set when starting the “Custom” program again.
1. Ensure that glass insert and glass lid are clean and undamaged. There may be
no cracks and chipped edges. If required, sterilize the glass parts via hot water
before filling in your food.
2. Fill 500 ml to 1100 ml of clear tap water into the kettle and place the kettle onto
the power base.
3. Fill the prepared food into the glass insert. However, do not fill in more than
480 ml. Then close the glass insert via the glass lid.
4. Place the glass insert lid ring (large opening) onto the work space and place the
glass insert into the central opening of the lid ring.
5. Then lift the lid ring by both handles. With the glass insert hanging in the lid
ring, slowly lower the glass insert into the kettle until the lid ring rests on the rim
of the kettle. Close the opening of the lid ring via the large stainless steel lid of
the glass insert lid set.
6. Press the “Hot water/Cooking” button repeatedly until “Custom” is indicated at
the lowest line of the display. The recently used temperature is displayed.
7. To adjust the temperature, turn the “°C/Time” knob until the required temperature
is shown on the display. You can set the temperature in the range of 40°C to
100°C.
8. Press the “°C/Time” button to display the set cooking time. Turn the “°C/Time”
knob until the required value is shown.
Note
You can set the cooking time from 30 seconds (“0m30s”) to 12 hours (“12h00mm”).
Using the “°C/Time” button, you can toggle the parameters as you like. After 6
seconds without any actions, the appliance will switch back to the normally dis-
played parameter.
