22
23
7. Press the “Start/Stop” button to start the program. The appliance will heat the
water within the kettle. As soon as the set temperature is reached, a signal sounds
and the “Start/Stop” button flashes. A count-up timer starts counting on the display.
WARNING:
With high water temperature set, hot steam may escape when
removing the tea lid and the tea lid may be hot. Only touch the tea lid by the
handle and be aware of hot steam, when removing the tea lid.
8. Remove the tea lid and immerse the prepared tea filter into the kettle by hanging
the tea filter into the tea lid ring. If required, turn the tea filter on the lid ring until
it settles down. Thereafter replace the tea lid.
9. Press the “Start/Stop” button. The appliance will start a count-down timer with
the set time value and “Steeping” will appear on the left side of the display.
Important:
If you do not press the “Start/Stop” button, the appliance will wait for
approx. 10 minutes and thereafter shut off with an acoustic signal, to avoid use-
less energy consumption.
Important:
To keep your working space dry and clean, we recommend to place
the tea filter onto the provided stainless steel bowl. The keep warm function is limi-
ted to 80°C. When pressing the “°C/Time” button with a program running, the
actual water temperature within the kettle will be shown on the display for approx.
6 seconds. Thereafter the display returns to showing the time.
10. As soon as the set steeping time elapsed, an acoustic signal sounds again and the
appliance switches to the keep warm function automatically (“Warm”). Remove the
tea lid by the handle and take out the tea filter. However, if the tea is still too light
and weak, you may decide to leave the tea filter within the kettle for some additi-
onal time. To take this into account, a second signal sounds after 40 seconds.
11. After taking out the tea filter, you should replace the tea lid securely within the
tea lid ring: Holding the tea lid by the handle, insert the tea lid in the tea lid
ring with the white arrow pointing to “Open”. Turn the tea lid clockwise within
the tea lid ring to “Close” to lock it securely.
Important:
Ensure that the tea lid ring is installed firmly on the kettle and the tea
lid is locked securely. Otherwise, the tea lid set could fall down during pouring.
12. If you remove the kettle from the power base after steeping to pour some tea, the
appliance will switch back to standby mode automatically. Otherwise, the keep
warm function will run for 60 minutes. Then the appliance will switch back to stand-
by mode. With no button pressed for another 5 minutes, the appliance will shut off.
Note
You may cancel any running program whenever you like. For this, simply hold the
“Start/Stop” button pressed for 3 seconds until the beep sounds.
COOKING IN THE KETTLE – HOT WATER/COOKING
By using the glass insert, you can cook various types of food within your tea kettle. For
this, the kettle must be filled with water to a filling level between 500 ml (MIN) and
1100 ml. However, you should adapt the filling level in the kettle to the amount of
food in the glass insert. Otherwise the glass insert could swim in the kettle and there-
fore the stainless steel glass insert lid cannot be closed correctly. Up to 480 ml of food
may be filled into the glass insert. Please adapt your recipe. Place the glass insert into
the tea kettle via the glass insert lid set (see: ‘Knowing Your New Tea & More’). The
water within the kettle is heated to a temperature between 40°C and 100°C (boiling
temperature). Select the required water temperature in standby mode.
CAUTION:
To avoid damage and risk of scalds, do not tilt the kettle or
pour the water within the kettle or add water to the kettle, while the glass insert
is mounted within the kettle. Always remove the glass insert and glass insert
lid set, before pouring or adding water.
Tip:
You may cancel any running program whenever you like. For this, simply hold
the “Start/Stop” button pressed for 3 seconds. To reduce energy consumption, it
is good advice to avoid leaving the appliance running uselessly.
ADDING WATER DURING OPERATION
If the filling level within the kettle drops below the MIN filling level (500 ml) during
operation, you need to add some water to the kettle.
1. By grasping both handles of the lid ring, lift the glass insert up and out of the
kettle. Place the glass insert onto the stainless steel bowl provided or on any
other suitable coaster.
CAUTION:
Do not let cold water run down at the side walls of the kettle, when the
kettle is hot. When adding water during operation, always pour the water slowly into
the middle of the kettle. Otherwise, the glass could crack! Please observe the maximum
filling level for operation with the glass insert (1100 ml). Do not overfill the kettle. Other-
wise the water could splash during operation or run out, when replacing the glass insert.
2. Pour the required amount of water slowly into the middle of the kettle.
