![background image](http://html1.mh-extra.com/html/gastroback/42395/42395_operating-instructions-manual_568941028.webp)
EN
EN
54
55
NOTE
Enter the required settings, while the numbers are flashing (approx. 15 seconds). The-
reafter, the appliance terminates the program mode automatically and the numbers
stop flashing. With the number shown continuously, the appliance switches back to
manual operation, when pressing any of the other buttons (e.g. “BREAD TYPE”, “+”,
“–”). If required, switch to program mode again (see above; step 2 and 3).
4.
Selecting your settings:
While the numbers are flashing, select the program via
the “BREAD TYPE” button and the browning via the browning buttons (“+” and
“–” buttons; see above: ‘Manual Operation’).
NOTE
When the following step is not performed, the former settings are kept and your
new settings get lost.
5.
Saving your settings:
Hold the “MEMORY” button pressed for approx. 2
seconds until the numbers of the storage places stop to flash. Thereafter your
settings are saved and may be recalled whenever you like.
Using Your Own Programmed Settings
1. Prepare the appliance for operation (see: ‘Preparing the Appliance for Operation’).
2. Press the “MEMORY” button. The digits of the storage places 1-4 are shown on
the display. The currently selected storage place is highlighted via a box and
the assigned program and browning are given.
3. If required, press the “MEMORY” button until the desired storage place is high-
lighted.
NOTE
When pressing any other button or pressing the “MEMORY” button, while sto-
rage plage 4 is selected, the appliance switches back to manual operation (see:
‘Manual Operation’).
4. With the desired storage place selected, start the heating process via the start
lever. The appliance starts operation according to the programmed settings.
REMOVING A BREAD SLICE STICKING IN A BREAD SLIT
Even when exercising caution, bread slices could bend during toasting and therefore
block the mechanic of the appliance, and prevents the appliance from shutting-off
automatically. This could cause overheating and the bread could even catch fire.
This is why you may never leave a toaster operate without supervision!
WARNING
–
Always immediately unplug the appliance and leave it
cool down completely, before loosening a bread slice that sticks within the
bread slit. Excercise caution and do not poke in the bread slits with any type
of object, because this could damage the mechanic and heating elements.
CAUTION
– The heating elements and mechanic of the toaster are fragile.
1.
Ensure that the appliance is unplugged and cooled down completely.
2. In most cases, you can loosen the bread slice by pushing the start lever careful-
ly down. Thereafter, try to move the bread slice to and fro a little for loosening
it, while slowly moving the start lever up until you can grasp the bread slice for
pulling it out.
3. Check the bread slit and mechanic of the toaster for any remaining pieces of
bread and, if required, remove these residues especially carefully. Thereafter,
empty the crumb tray (see: ‘Care and Cleaning’).
SOLVING PROBLEMS
If any problems occur during operation, you will find the solution in the following table.
Problem
Reason
The Solution
Emergency shut-off
required?
Immediately unplug the appliance.
The display is dark, alt-
hough the appliance is
plugged in.
The appliance is in energy
saving mode.
Touch any button.
The appliance is not live. Ensure that the appliance is connected to a suitable wall
power outlet (see: ‘Important Safeguards for Electrical
Appliances’). Ensure that the wall power outlet is live by
connecting a lamp.
A severe problem occur-
red.
Unplug the appliance. Get in contact with an authorised
service centre for examination and repair.
The appliance is wor-
king, but the food is not
heated.
The start lever is not enga-
ged in the lower operation
position.
Press down the start lever until it engages. While the appli-
ance is operating, the “CANCEL” button is illuminated red.