1.
Place the motor block on a suitable, stable, dry, and clean
working surface. (see: ‘Safeguards for Daily Operation’). The control
panel has to face the front.
2.
Place the bowl on the motorblock turning it anticlockwise until it is
securely locked in position. Do not use any force. The handle should be
facing the front which is above the control panel (picture A).
3.
Fit the spindle onto the drive shaft, in the middle of the processing
bowl (picture B). The long shaft of the spindle has to slide over the
drive shaft and the end with the aglet should face upright. If
necessary turn the spindle a little to fit in position. The spindle sticks
out of the bowl for 1 or 2 cm.
Note: All attachments must be firmly attached to the
spindle. Always adjust the attachments until you are
sure that they are correctly fitted.
4.
Put the disc or blade you want to use on top of the spindle turning
the disc until the hexagonal nut of the disc fits on the hexagon bolt of
the spindle (picture C/D). The side which you want to use has to face
upwards.
Operating the different discs and blade
Reversible grating and shaving disc (picture E)
For grating (i. e. carrots) use the grating and shaving disc. To
achieve finely grated results, the side with the arched blades has
to face upwards. To achieve finely grated flakes the side with the
small blades has to face upwards.
Reversible shredding disc - fine and coarse (picture F)
To achieve fine and coarse shredding results use the shredding
disc (i.e. cucumber) and put it onto the top of the spindle. For
coarse shredding results, the side with the bigger arched blades
has to face upwards. For fine shredding results, the side with the
smaller arched blades has to face upwards.
Julienne disc (picture G)
To cut food in consistent julienne, perfect for salad, stir fry or garnishing use the julienne
disc. The side with the blades has to face upwards.
9
A
B
C
D
G
F
E
40965_designfoodprozessoradvanced_manual_english.qxp 29.01.2008 12:15 Seite 9
Summary of Contents for 40965
Page 35: ...Notes 35...
