Gastroback 40965, Operating Instructions Manual

Page: 8 / 36

Operating
The Design Food Processor Advanced works extremely quick; most kinds of food are
processed within some seconds. The Food Processor is designed only for short time operation
of max. 4 minutes. If you need it for longer, switch it off after 4 minutes and allow the
motor to cool for 1 minute.
The appliance has a safety contact, which allows the motor to start running only if the
bowl is positioned correctly on the motorblock. If the motor stalls or sticks during operation,
immediately turn ´OFF` the appliance and unplug the power connector. Check whether
there is any obstruction in the processing bowl, and remove it (see ‘Care and Cleaning’).
Do not overfill the processing bowl. Possibly, take some food out of the processing bowl,
using a wooden or plastic spoon, before starting the appliance again. Do not insert your
fingers in the processing bowl.
Important:
The Food Processor is fitted with a safety
thermal cut-out device and will shut off in the event of overload. If this occurs, switch the
appliance ´OFF` and it will automatically reset when cool.
• Operating the discs: remove the fibre of the discs when the openings are blocked.
Always use the food pusher when operating and gently guide food down the feed
chute.
• Operating the universal ´s` blade: Remove all inedible hard parts (such as stem, hard
peeling and seeds) of the food before putting them into the feed chute. The food could wedge
the blade. Pay attention that the bowl does not get overloaded and if necessary turn the
appliance ´OFF` and remove some food of the bowl with a spoon before continuing to operate.
•
WARNING:
Do not overfill the processing bowl or food collector. Possibly, take some
food out, using a wooden or plastic spoon, before starting the appliance again.
Before first use
WARNING: The blades and discs are very sharp. Pay attention when handling the units.
Only touch the discs and blades on the edge and handle with care when cleaning. Do
not leave young children play with the appliance or any part of it or the packing material.
After unpacking, remove all promotional and packing materials as well as any foreign objects.
Before first use and after a long period of storage, clean the appliance with a damp soft
cloth and warm soapy water (see ‘Care and Cleaning’).
Operating with the normal processing bowl
WARNING:
Always turn the appliance ´OFF`, wait until the motor stops and unplug the
appliance before assembling/disassembling. Always completely assemble your appliance
before you plug the plug into the power outlet and ensure no foreign substance is in the
feed chute. Only touch the discs on the edge and blades by its central plastic section and
handle with care when cleaning.
8
40965_designfoodprozessoradvanced_manual_english.qxp 29.01.2008 12:14 Seite 8