Gaspardo S MARIA Series, Use And Maintenance

Page: 34 / 146

USE AND MAINTENANCE
34
-
cod. G19503220
ENGLISH
1.3 TECHNICAL DATA
U.M. S MARIA SC MARIA
250 300 350/360 400 250 300 350/360 400
Working width [m] 2,50 3,00 3,60 4,00 2,50 3,00 3,60 4,00
Transport width [m] 2,55 3,20 3,80 4,20 2,55 3,20 3,80 4,20
Max. row number [nr.] 17 (
18
) 22 (
25
) 25 (
28
) 28 (
32
) 17 (
18
) 22 (
25
) 25 (
28
) 28 (
32
)
Row distance [cm] 14,7(
13,8
) 13,6 (
12
) 14 (
12,5
) 14,3(
12,5
) 14,7(
13,8
) 13,6 (
12
) 14 (
12,5
) 14,3(
12,5
)
Seed hopper capacity [l] 611 755 1274 1489 391 483 815 953
Fertilizer hopper capacity [l] - - - - 220 272 459 536
Total hopper capacity [l] 611 755 1274 1489 611 755 1274 1489
Weight (max) - Version «R» and «L» [kg] 695 850 1050 1250 735 910 1180 1290
Weight (max) - Version «DD» [kg] 720 900 1200 1300 760 950 1250 1350
Distribucion [Type] Mechanical
Tyres [Type] 6.50/80-15 6.00-16 10.50/75-16
Tyre infl ation pressure [bar] 2,4 2,4 2,7
Working speed [Km/h] 15 (max.)
Electrical system [V] 12
TRACTOR SPECIFICATIONS (REQUIRED)
Minim power required [HP - kw] 70-52 90-66 100-74 120-90 70-52 90-66 100-74 120-90
Three- point universal joint [nr.] II (towing eye*) II (towing eye*)
Battery voltage [V] 12 12
Tractor pump pressure (max.) [bar] 180 180
Tractor hydraulic connections Row marker: nr. 1 single-acting;
Pull hitch kit: nr. 1 double-acting;
12 V electrical connections Lights kit: 7-pole connector;
(*) Trailed version.
The technical data and the models provided must be considered as non binding. We reserve the right to change them without
notice.
1.4 IDENTIFICATION
Each individual machine has an identifi cation plate (Fig. 1) indica-
ting the following details:
1) Mark and address of the Manufacturer;
2) Type and model of machine;
3) Unloaded mass, in Kilograms;
4) Mass full load, in Kilograms;
5) Registration of the machine;
6) Year of manufacture;
7)
CE mark.
You are advised to note down your data on the form below, along
with the date of purchase (8) and the dealer’s name (9).
8) ____________________
9) ____________________
This information must always be quoted whenever assistance or
spare parts are needed.
ATTENTION
Do not remove, tamper with or make the CE mark affi xed on
the machine illegible.
Refer to the information provided on the CE mark for the
manufacturer’s contact details (e.g. for requesting spare
parts, etc.).
When the machine is demolished, destroy the CE marking.
(1)
(2)
(3)
(5)
(4)
fi g. 1
(7)
(6)