Gaspardo S MARIA Series, Use And Maintenance

Page: 35 / 146

USE AND MAINTENANCE
35
-
cod. G19503220
ENGLISH
1.5 HANDLING
ATTENTION
The Customer must apply the rules envisaged in the European Directives EEC 391/89 and 269/90 and subsequent modifi cations
on the possible risks for loading and unloading operators caused by manual handling of loads.
During handling operations wear suitable personal protection equipment:
Overalls Gloves Shoes Hardhat
If the machine is handled, it must be lifted by hooking (Fig. 2) onto the appropriate holes with a suitable winch or crane of suffi cient
capacity. Because of the danger involved, this operation should be carried out by trained and responsible personnel. The mass of the
machine is on the identifi cation Plate (Fig. 1). Stretch the rope to keep the machine level. Adjust the length of the ropes to balance the
load. The hook points can be detected by fi nding the «hook» symbol (11, Fig. 4).
If the assembled machine is too large, some units may be disassembled from the machine; these units, which are placed inside the
same package. Install these parts with care following the instructions provided in the installation manual supplied with the machine.
Always tighten the screws supplied according to the tightening torques indicated in the table on page 40.
fi g. 2
ATTENTION
• Packaging materials (pallets, cartons, etc.) must be disposed of as prescribed by the existing regulations through authorised
disposal companies.
• Parts making up the machine must not be lifted by hooking them up from moving or weak parts such as guards, electrical
runways, pneumatic parts, etc.
• Standing under suspended loads is not allowed; unauthorised personnel are not allowed access to the work sites; it is
mandatory to wear overalls, safety footwear, gloves and a hardhat.