background image

 

 

GW01 - 6/04/02  Rev. 1 

WARRANTY 

General Statements: 
Gasboy International LLC. warrants all new equipment manufactured by Gasboy against defective material and/or workmanship, for the warranty  
period specified below, when the equipment is installed in accordance with specifications prepared by Gasboy. 
This warranty does not cover damage caused by accident, abuse, Acts of God, lack of surveillance of automatic recording systems, negligence,  
mis-application, faulty installation, improper or unauthorized maintenance, installation or use in violation of product manuals, instructions, or warnings. 
Under no circumstance shall Gasboy be liable for any indirect, special, or consequential damages, losses, or expenses to include, but not limited  
to, loss of product, loss of profits, litigation fees, or the use, or inability to use, our product for any for any purpose whatsoever. 
Parts Only - During the warranty period, Gasboy will, at its option, repair or replace defective parts returned transportation prepaid to its factory. 
On-Site Labor Included - Gasboy will also provide, within the Continental United States and during the warranty period, the services of an  
Authorized Service Representative (ASR) for on-site repair or replacement of defective parts. 
Replacement Parts - Any system components that are not part of the original system order, including Island Card Readers, Pump Control Units, etc., 
are considered replacement parts. 

 

Equipment 

Term 

Coverage 

Commercial Pumps and Dispensers 
Full-Cabinet Consumer Pumps 

One year from date of installation or 18 mos. from date of 
Gasboy International’s invoice to the purchaser, whichever 
comes first. 

Parts and Labor. 

Small Transfer Pumps, Meters, 
Pressure Regulators 

One year from date of installation or 18 mos. from date of 
Gasboy International’s invoice to the purchaser, whichever 
comes first.- Excepting the Model 2020 Hand Pump, which 
has a 90-day warranty from date of GASBOY International’s 
invoice. 

Parts Only. 

Keytrol 

One year from date of installation or 18 mos. from date of 
Gasboy International’s invoice to the purchaser, whichever 
comes first. 

Parts and Labor. 

Fuel Management Systems: 
- CFN/ Profit Point  
- Series 1000/Fleetkey 
- TopKAT  
- Fuel Point Readers  
  (sold with new systems) 

One year from date of start-up or 15 mos. from date of 
Gasboy International’s invoice to the purchaser, whichever  
comes first.- The basic warranty only applies to systems 
which have been started up by a Gasboy Authorized Service 
Representative (ASR). 

Parts and Labor. 

Additional Fuel Point Items: 
- Fuel Point Readers sold for 
  retrofitting existing systems. 
- Fuel Point vehicle and dispenser 
  components. 

One year from date of start-up or 15 mos. from date of 
Gasboy International’s invoice to the purchaser,  
whichever comes first. 

Parts Only. 

Encoders, Embossers, Modems, 
CRTs, and Logger Printers 

Purchased with Fuel Management System (Encoders, 
Embossers only): 
90 days from the date of start-up by a Gasboy ASR, or 180 
days from date of Gasboy International's invoice, whichever 
occurs first. 
 
Purchased with Fuel Management System 
(Modems, CRTs, and Logger Printers only): 
Matches system warranty. 
 
Purchased Separately: 
90 days from date of Gasboy International's  
invoice to the purchaser. 

Purchased with System  
(Encoders, Embossers only): 
Parts only. 
 
 
 
Purchased with System (Modems, 
CRTs, Logger Printers only): 
Matches system warranty. 
 
Purchased Separately: 
Parts Only. 

Air Diaphragm Pumps 

Three years from date of purchase (for full warranty 
description, see Price List). 

Parts Only. 

Items not manufactured by Gasboy 
(ex. automatic nozzles, hoses, swivels, 
etc.) 

Not warranted by Gasboy International (consult original 
manufacturer’s warranty). 

Not Applicable. 

Replacement Parts 

One year from date of Gasboy International's invoice to the 
purchaser. 

Parts Only. 

 

To the extent permitted by law, this warranty is made in lieu of all other warranties, expressed or implied, including warranties of freedom from patent  
infringement, or merchantability, or fitness for a particular purpose, or arising from a course of dealing or usage of trade. No one is authorized to  
vary the terms of the warranty nor may anyone make any warranty of representation, or assume any liability other than that herein stated, in  
connection with the sale described herein. The acceptance of any order by Gasboy International is expressly made subject to the purchaser's  
agreement to these conditions. 

 

 

GASBOY INTERNATIONAL LLC 

P.O. Box 309, Lansdale, PA 19446 

 (800) 444-5579 

 FAX: (800) 444-5569 

● 

www.gasboy.com

 

Summary of Contents for SERIES 1000























Reviews: