background image

Important Safety Information

Page 4

MDE-4864B Gasboy® 9820 Pump Interface Kits Installation Instructions · March 2022 

No Open Fire

Open flames from matches, lighters, welding torches or other 

sources can ignite fuels and their vapors.

No Sparks - No Smoking

 

 

Sparks from starting vehicles, starting or using power tools, 

burning cigarettes, cigars or pipes can also ignite fuels and their 
vapors. Static electricity, including an electrostatic charge on your 
body, can cause a spark sufficient to ignite fuel vapors. Every time 
you get out of a vehicle, touch the metal of your vehicle, to discharge 
any electrostatic charge before you approach the dispenser island.

Working Alone

It is highly recommended that someone who is capable of rendering 
first aid be present during servicing. Familiarize yourself with 
Cardiopulmonary Resuscitation (CPR) methods, if you work with or 
around high voltages. This information is available from the American 
Red Cross. Always advise the station personnel about where you will 
be working, and caution them not to activate power while you are 
working on the equipment. Use the OSHA Lockout/Tagout 
procedures. If you are not familiar with this requirement, refer to this 
information in the service manual and OSHA documentation.

Working With Electricity Safely

Ensure that you use safe and established practices in working with 
electrical devices. Poorly wired devices may cause a fire, explosion 
or electrical shock. Ensure that grounding connections are properly 
made. Take care that sealing devices and compounds are in place. 
Ensure that you do not pinch wires when replacing covers. Follow 
OSHA Lockout/Tagout requirements. Station employees and service 
contractors need to understand and comply with this program 
completely to ensure safety while the equipment is down.

Hazardous Materials

Some materials present inside electronic enclosures may present a 
health hazard if not handled correctly. Ensure that you clean hands 
after handling equipment. Do not place any equipment in the mouth

In an Emergency

Inform Emergency Personnel

Compile the following information and inform emergency 
personnel:

• Location of accident (for example, address, front/back of 

building, and so on)

• Nature of accident (for example, possible heart attack, run 

over by car, burns, and so on)

• Age of victim (for example, baby, teenager, middle-age, 

elderly)

• Whether or not victim has received first aid (for example, 

stopped bleeding by pressure, and so on)

• Whether or not a victim has vomited (for example, if 

swallowed or inhaled something, and so on)

IMPORTANT

: Oxygen may be needed at scene if gasoline has 

been ingested or inhaled. Seek medical advice immediately.

Lockout/Tagout

Lockout/Tagout covers servicing and maintenance of machines 
and equipment in which the unexpected energization or start-up 
of the machine(s) or equipment or release of stored energy 
could cause injury to employees or personnel. Lockout/Tagout 
applies to all mechanical, hydraulic, chemical, or other energy, 
but does not cover electrical hazards. Subpart S of 29 CFR Part 
1910 - Electrical Hazards, 29 CFR Part 1910.333 contains

specific Lockout/Tagout provision for electrical hazards.

In the event of inclement weather, including snow, ice, or flooding 
that makes driving conditions dangerous, please avoid servicing 
units. Always use available door stops to secure upper doors 
against unwanted/unexpected movement, especially during high 
winds. If necessary, reschedule service to avoid damage to the 
equipment. Weather may change unexpectedly; be aware of local 
weather conditions. During service, if conditions develop making 
service unsafe, close the unit(s) and proceed to a safe location.

WARNING

!

The pump/dispenser contains a chemical known to the State of 
California to cause cancer.

WARNING

!

The pump/dispenser contains a chemical known to the State of 
California to cause birth defects or other reproductive harm.

WARNING

!

Gilbarco Veeder-Root encourages the recycling of our 
products. Some products contain electronics, batteries, 
or other materials that may require special 
management practices depending on your location. 
Please refer to your local, state, or country regulations 
for these requirements. 

Gasoline/DEF ingested may cause unconsciousness 
and burns to internal organs. Do not induce vomiting. 
Keep airway open. 
Oxygen may be needed at scene. Seek medical 
advice immediately.

WARNING

!

DEF generates ammonia gas at higher temperatures. When 
opening enclosed panels, allow the unit to air out to avoid 
breathing vapors. If respiratory difficulties develop, move victim 
away from source of exposure and into fresh air. If symptoms 
persist, seek medical attention.

WARNING

!

Gasoline inhaled may cause unconsciousness and 
burns to lips, mouth and lungs.
Keep airway open.
Seek medical advice immediately.

WARNING

!

Gasoline/DEF spilled in eyes may cause burns to eye 
tissue.
Irrigate eyes with water for approximately 

15 minutes.Seek medical advice immediately.

WARNING

!

Gasoline/DEF spilled on skin may cause burns.
Wash area thoroughly with clear water.
Seek medical advice immediately.

WARNING

!

DEF is mildly corrosive. Avoid contact with eyes, skin, and 
clothing. Ensure that eyewash stations and safety showers are 
close to the work location. Seek medical advice/recommended 
treatment if DEF spills into eyes.

WARNING

!

Summary of Contents for 9820











Reviews: