background image

Owner's Manual

-50-

FINAL THOUGHTS

PREVENTATIVE ADVICE

 Take the ! me to perform all necessary checks and maintenance on your 

motorcycle before taking it out for a ride. In some parts of this manual, 

informa! on is provided about work to be carried out in a GAS GAS authorised 

garage. For this reason and in order to increase the life of your motorcycle, 

periodic checks of the motorcycle must only be carried out by experts in GAS 

GAS

’s A" er-Sales Service.

Failure to carry out proper maintenance of the motorcycle and ignoring prob-

lems, however small, can result in serious physical injury or even death.

To avoid excessive ageing of the plas! c and other washable parts of the motor-

cycle, we recommend careful cleaning of them. If you use high pressure and/or 

temperature water equipment, take care to keep the water jet at least 30 cen! me-

tres away from the surfaces to ensure that the plas! c stays shiny and the s! ckers 

that decorate the motorcycle are not removed.

SAFE OPERATION OF YOUR MOTORCYCLE

Safe riding of a motorcycle does not only depend on the machine. Also 

important are the prudence and intelligence of the rider. We recommend that 

you enjoy your favourite sport with the necessary equipment (helmet, pads and 

guards, boots, etc.).

LEGAL NOTICES

In the interests of technical development, we reserve the right to modify the 

construc! on, equipment and accessories of the motorcycle. Measurements, 

weight and power data are understood to include the respec! ve tolerances. 

Depending on the amount of equipment and accessories of your motorcycle, 

as well as the export versions, there may be varia! ons regarding descrip! ons 

and illustra! ons, meaning that the photographs shown in this manual may not 

correspond to the model purchased. Because of this, there can be no liability 

except in cases of error, misprint or omission.

 GAS GAS reserves the right to make changes and/or modifi ca" ons without 

prior no" ce.

Final thoughts

Summary of Contents for TXT RACING 125CC 2020




















































Reviews: