Owner's Manual
-24-
Removing the fi lter box
To carry out any opera! ons on the carbure" or, it is advisable to remove the fi lter
box for be" er access. Follow these steps:
1. Loosen the inlet nozzle clamp.
2. Unscrew the 4 cone-shaped M6 Allen screws that secure the fi lter box to the
frame.
3. Pull out the fi lter box slightly so that the connector of the rear wiring is visible.
(Fig. 1).
4. Disconnect the connector (Fig. 2)
5. Completely remove the fi lter box
The carbure" or will be le$ exposed and can be removed from the engine assem-
bly by loosening the reed block pipe clamp.
Loosen the two screws on the upper cover of the carbure" or so that the body is
ready for cleaning.
Take care to completely dry the inside of the carbure" or. Traces of water, dirt or
other elements can enter the reed block and damage it, and consequently damage
the piston cylinder assembly.
Fig. 2
Fig. 2
Removing the carburettor
Summary of Contents for TXT RACING 125CC 2020
Page 1: ......
Page 41: ...Owner s Manual 41 Approved electrical system...
Page 42: ...Owner s Manual 42 Ignition electrical system...
Page 51: ......