GAS GAS TXT RACING 125CC 2020, Owner'S Manual

Page: 26 / 51

Owner's Manual
-26-
Removing the carburettor
Remove and regularly clean the main jet a! er washing and clean the inside of
the carbur e" or fl oat chamber.
The reed block assembly only consists of a body, reeds and stops. To examine
this assembly, remove it by unscrewing the 4 screws that hold it to the back of the
le! and right-hand crankcases.
Since it is the last access door to the inside of the cylinder, take special care to
keep it in good condi$ on and regularly check its proper$ es. Take care to cover the
cylinder inlet with a clean cloth to prevent foreign objects from entering the com-
partment when the components are handled.
The distance between the reed and the stop must be 3.3 mm on each side of the
reed valve, in all displacements. The sheets must be in perfect condi$ on. They can
not have notches, scratches or bent and / or broken parts. If so, you must proceed
to change the set for a new one.
Removing the reed block