Owner's Manual
-30-
Rear suspension
The preloading of the shock absorber is adjusted by rota! ng the toothed rings
(C)
with two special spanners. Star! ng from the standard preloading of 7.5
mm for 300-280-250 and 7 mm for 125, ! ghten or loosen, depending on the
weight of the rider, reaching a maximum of 9 mm of preloading (see spring and
preloading table). Preloading is the diff erence in length in mm between a spring
when it is tensioned and when it is at rest.
The rebound or extension is adjusted with the screw. Its standard posi! on is 20
clicks from closed. From this star! ng posi! on, open clicks if faster extension or
rebound is sought and close clicks if slower extension or rebound is desired.
ÖHLINS SHOCK ABSORBER
Rider weight without
equipment (Kg)
K (N/mm) spring
Spring preloading
(mm)
Up to 70
65
7
From 70 to 85
70
7.5
Over 85
75
From 7 to 8.5
C
Summary of Contents for TXT RACING 125CC 2020
Page 1: ......
Page 41: ...Owner s Manual 41 Approved electrical system...
Page 42: ...Owner s Manual 42 Ignition electrical system...
Page 51: ......