GAS GAS MC 450F 2021, Owner'S Manual

Page: 128 / 142

22 TECHNICAL DATA
126
Spring rate
Weight of rider: 65 … 75 kg (143 … 165 lb.) 42 N/mm (240 lb/in)
Weight of rider: 75 … 85 kg (165 … 187 lb.) 45 N/mm (257 lb/in)
Weight of rider: 85 … 95 kg (187 … 209 lb.) 48 N/mm (274 lb/in)
Spring length 260 mm (10.24 in)
Gas pressure 10 bar (145 psi)
Static sag 35 mm (1.38 in)
Riding sag 105 mm (4.13 in)
Fitted length 477 mm (18.78 in)
Shock absorber oil Shock absorber fluid (SAE 2.5)
(50180751S1) (
p. 130)
22.9 Chassis tightening torques
Screw, air filter box cover EJOT PT ® K60x20-Z 3 Nm (2.2 lbf ft)
Screw, combination switch EJOT PT ® K50x18 T20 2 Nm (1.5 lbf ft)
Screw, intake air temperature sensor EJOT DELTA PT ® 45x12
‑
Z 0.7 Nm (0.52 lbf ft)
Screw, radiator hoses clip 2.4 Nm (1.77 lbf ft)
Fitting, start button M3 0.4 Nm (0.3 lbf ft)
Fitting, stop button M3 0.4 Nm (0.3 lbf ft)
Fitting, inlet sleeve to throttle valve
body M4 2.8 Nm (2.07 lbf ft)
Screw, fixed grip M4 5 Nm (3.7 lbf ft)
Loctite ® 243™
Screw, service hour counter M4 0.8 Nm (0.59 lbf ft)
Spoke nipple, front wheel M4.5 6 Nm (4.4 lbf ft)
Spoke nipple, rear wheel M4.5 6 Nm (4.4 lbf ft)
Remaining nuts, chassis M5 5 Nm (3.7 lbf ft)
Remaining screws, chassis M5 5 Nm (3.7 lbf ft)
Screw, battery terminal M5 2.5 Nm (1.84 lbf ft)
Screw, brake line guide on link fork M5 5 Nm (3.7 lbf ft)
Screw, frame protector M5 3 Nm (2.2 lbf ft)
Screw, shock absorber adjusting ring M5 5 Nm (3.7 lbf ft)
Screw, throttle valve body cover M5 2.6 Nm (1.92 lbf ft)
Nut, cable on starter motor M6 4 Nm (3 lbf ft)
Nut, throttle cable on throttle valve
body M6 3 Nm (2.2 lbf ft)
Remaining nuts, chassis M6 10 Nm (7.4 lbf ft)
Remaining screws, chassis M6 10 Nm (7.4 lbf ft)
Screw, ball joint of push rod on foot
brake cylinder M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, battery support bracket M6 6 Nm (4.4 lbf ft)
Screw, cable on starter relay M6 6 Nm (4.4 lbf ft)
Screw, chain guide on link fork M6 10 Nm (7.4 lbf ft)
Loctite ® 243™
Screw, chain sliding guard M6 6 Nm (4.4 lbf ft)
Loctite ® 243™