SERVICE WORK ON THE CHASSIS 11
47
A00885-10
Main work
–
Remove screws
1
and take off the clamp.
–
Remove screws
2
and take off the brake caliper.
–
Allow the brake caliper and the brake line to hang loosely to the
side.
Info
Do not actuate the hand brake lever when the front wheel is
removed.
A00788-10
–
Loosen screws
3
. Remove the left fork leg.
–
Loosen screws
4
. Remove the right fork leg.
11.8
Installing the fork legs
H01182-10
Main work
–
Position the fork legs.
Air bleeder screw
1
of the right fork leg is positioned to the
front.
Valve
A
of the left fork leg faces the front.
Info
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
The air suspension is located in the left fork leg. The pres-
sure and rebound damping is located in the right fork leg.
A00778-11
–
Tighten screws
2
.
Guideline
Screw, top triple clamp M8
20 Nm (14.8 lbf ft)
–
Tighten screws
3
.
Guideline
Screw, bottom triple
clamp
M8
15 Nm (11.1 lbf ft)
