GAS GAS EC 350F, Owner'S Manual

Page: 55 / 150

SERVICE WORK ON THE CHASSIS 12
53
V01791-10
–
Position the fork legs.
Bleeder screws
5
are positioned toward the front.
Info
The rebound damping is located in right fork leg REB (red
adjuster).
The compression damping is located in left fork leg COMP
(white adjuster).
Grooves are milled into the side of the upper end of the fork
legs. The second milled groove (from the top) must be flush
with the upper edge of the upper triple clamp.
F03185-10
–
Tighten screws
6
.
Guideline
Screw, bottom triple
clamp M8 15 Nm (11.1 lbf ft)
F03186-10
–
Tighten screw
4
.
Guideline
Screw, top steering
head M20x1.5 12 Nm (8.9 lbf ft)
–
Mount and tighten screw
7
.
Guideline
Screw, top steer-
ing stem M8 20 Nm (14.8 lbf ft)
Loctite ® 243™
F03185-11
–
Tighten screws
8
.
Guideline
Screw, top triple clamp M8 20 Nm (14.8 lbf ft)
F03181-11
–
Position the brake caliper, and mount and tighten screws
9
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Mount the cable ties.
–
Position the brake line, the wiring harness, and the clamp. Mount
and tighten screws
bk
.
Finishing work
–
Mount the handlebar cushion.
–
Install the front fender. ( p. 56)